Process: parameter setting of welding head welding

一.参数的设置

Parameter setting

首页的焊接模式选择：连续，并设置工艺，调整好需要的焦点和铜嘴

（工艺的参考数值可以在我们工艺里查看）

Welding mode selection of home page: continuous, and set the process, adjust the required focus and copper nozzle.

(The reference values of the process can be viewed in our process.)

二.红光的调整

Adjustment of red light

请务必红光在中心，如有偏移，请参照：红光的调整‍

Please make sure that the red light is in the center. If there is any deviation, please refer to: Adjustment of Red Light.

三.铜嘴的选择

Selection of copper nozzle

请使用对应的铜嘴焊接，请参照：铜嘴分类

Please use the corresponding copper nozzle for welding. Please refer to: Classification of Copper Nozzle.