How to change ordinary welding to cleaning mode本文适用于标准版本更改清洗系统，宽度最大45MM This article is applicable to the standard version change cleaning system, with a maximum width of 45 mm. 1.系统的更换 拍摄【监测】页面到技术群内，获取匹配的清洗版本，通过刷程序导入系统 1. System replacement Shoot the [Monitoring] page into the technical group, get the matching cleaning version, and import it into the system through the brush program. Brush program scheme 2.镜片的更换 把聚焦镜更换为清洗的镜片（常见型号为D20*3.5/F400） 更换镜片 2. Replacement of lenses Replace the focusing lens with a cleaned lens (the common model is D20*3.5/F400). Replace the lens 3.其他部件的取消 拿掉前面部分即可 3. Cancellation of other components Just take off the front part
4.工艺 参照小程序工艺清洗部分 4. Technology Refer to the small program process cleaning part |
